:	Jul 21, 2008

: It is possible to install the stabilizer bar incorrectly. Note the position of the stabilizer bar before removal.

.

: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands. Raise and support the vehicle.

.

Remove the rear bumper cover.

.

Remove the spare wheel and tire.

.

Raise the vehicle.

.

Remove the rear wheels and tires.

.

: Use a wrench on the hexagon provided to prevent the ball joint rotating. Release both stabilizer bar links.   Remove and discard the 2 nuts.

.

Remove the body mount retaining bolts.   Remove the 8 bolts.

.

: Only raise the body sufficiently to remove the body mount. Carefully raise the body.   Using suitable stands, raise the body to release the body mounts.

.

Remove the 2 rear body mounts.

.

Remove the stabilizer bar bushing.   Remove the stabilizer bar clamps.   Remove the 4 bolts.

.

: Mark the position of the stabilizer bar. Remove the stabilizer bar.

.

: Make sure the stabilizer bar is correctly installed. Install the stabilizer bar.

.

Install the stabilizer bar bushing.

.

Install the stabilizer bar clamps.   Tighten the 4 retaining bolts to 62 Nm (46 lb.ft).

.

Install the body mounts.

.

Lower the body.   Remove the stands.

.

Install the body mount retaining bolts.   Tighten the 8 retaining bolts to 133 Nm (98 lb.ft).

.

Attach both stabilizer bar links.   Tighten the nuts to 115 Nm (85 lb.ft).

.

Install the wheels and tires.

.

Lower the vehicle.

.

Install the spare wheel and tire.

.

Install the rear bumper cover.